|
|
 |
 |
 Delays are created with a low-loss microwave clad material with RF relays attached directly to the printed circuit (PC) board. The HPDL-1A offers excellent performance from DC to 600 MHz at maximum delay, and is usable to 1000 MHz. The
minimum resolution is fixed at 10 ps, and Maximum Delay Range is 10.23 ns. The unit comes with Manual Control on the Front Panel of the instrument, GPIB (IEEE488.2), and RS232 Interfaces standard.
NOTE: The HPDL-1A has been
superseded by our newer HPDL-100A Series of instruments offering
additional features and functionality.
The model HPDL-1A will no longer be
available after June 30, 2006.
 Insertion/Return Loss Report for HPDL-1A (944 KB)
HPDL-1A Specifications
| Minimum Step Size: |
10 ps |
| Maximum Delay Range: |
10.23 ns |
| Minimum Phase Shift Resolution: |
0.36 deg. per 100 MHz |
| Maximum Phase Shift: |
368.28 deg. per 100 MHz |
| Delay at 0 ns Setting: |
4.40 ns |
| Typical Absolute Accuracy: |
± 1%, ± 3 ps for each binary step |
| Analog Bandwidth (-3 dB), typical: |
|
| for total delay below 2.5 ns |
DC to 1000 MHz |
| for total delay above 2.5 ns |
DC to 600 MHz |
| Data Rate (NRZ), typical: |
|
| for total delay below 2.5 ns |
DC to 2.0 Gb/s |
| for total delay above 2.5 ns |
DC to 1.2 Gb/s |
| Rated Lifetime at 20 mA DC: |
200,000 Operations |
| Maximum Settling Time: |
50 ms |
| Line Voltage: |
85-102 V, or 110-122 V, or 215-245 V, 50/60 Hz. Please specify. |
| Power Requirement: |
30 VA |
| Recommended Operating Temperature: |
10° C to 30° C. |
| Physical Dimensions: |
13 3/8" Long x 12 7/8" Wide x 5 1/4" High. |
| Physical Weight: |
9.7 lbs. |
| 19" Rackmount Kit RMO: |
Optional |
|
