XS-100
The XS-100 is designed for those who need faster switching speeds and measurements without interruptions
Recommended if you need faster switching speeds within a limited bandwidth and signal power range
XS-100 Overview
The key hallmark of the XS-100 is its use of solid-state PIN diode technology. Although this results in a smaller total range and coarser resolution than Colby products in the XT and XR series, the XS-100 gives faster switching speeds that's limited only by the speed of your network and can be under 50 ms. The faster switching speeds and a continuous signal path mean you can measure without interruptions, and all at a lower cost.
The only product line that uses solid-state PIN diode technology
Total delay range up to 10.23 ns
Step resolution as small as 1.0 ps
Switching speed less than 50ms, depending on network speed
XS-100 Technical Specs
XS-100 | |
---|---|
Technology Type | Solid state PIN diodes |
# of Channels | 1 |
Signal Input Range | 100 mhz to 3.5 GHz |
Min. Step Resolution | 1 ps or 5 ps |
Max Delay Range | 5.12 ns or 10.23 ns |
Phase Shift Step Resolution | 9 ° per 1 GHz |
Total Phase Shift at 1 GHz | 1842 ° or 3686 ° |
Total Phase Shift at 5 GHz | n/a |
Switching Speed | < 50 ms |
Ext. Trigger | yes |
Ethernet TCP/IP | yes |
Serial RS-232 | yes |
MT-100A | optional |
Web Browser UI | yes |
Microwave Relays Rated | n/a |
Recommended Service Interval | n/a |
Min. frequency for 360° phase shift coverage | |
Dimensions | 12.0" L x 16.5" W x 1.75" H (1U) |
Weight | 2.7 kg (6.0 lbs.) |
Optional Add On
MT-100A MICROTERMINAL
MT-100A provides convenient LCD display and numeric keypad entry for manual control of desired delay.
-
XS-100 Data Sheet
-
XS-100 Insertion/Return Loss Report
Other Colby Products